Cisco 3650 Generate Ssh Key

If you can't into the firewall via SSH because no one generated a certificate, then you can generate the crypto key from within the ASDM. Cisco ASA – Gernerate RSA Keypair From ASDM. May 23, 2017  Once you set the host name and domain-name (ip domain-name whatever), you simply do (in configuration mode) a 'crypto key gen rsa 2048' (or whatever you want the key length to be). I have one 3750 which doesn't have the right feature set for ssh (which I will get around to updating) so check that there is a k8 or k9 in the image name. Jan 14, 2018  DETAILED STEPS Step 1. Enables privileged EXEC mode. Enter your password if prompted. Enters global configuration mode. Specifies the RSA key pair to be used for SSH. A Cisco device can have many RSA key pairs. Enables the SSH server for local and remote authentication on. Mar 30, 2020  Easy configure ssh on Cisco router or switch. For remote connection to router or switch, you need to enable ssh on Cisco router and configure ssh correctly. Easy configure ssh on Cisco router or switch. Configure the router to use RSA key pair with modulus size of 1024 bites for remote service authentication with “crypto key generate rsa.

  1. Generate Ssh Key Github
  2. Generate Ssh Key Putty
  3. Cisco Ssh Key Generation

Contents

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to http:/​/​www.cisco.com/​go/​cfn. An account on Cisco.com is not required.

Prerequisites for Configuring the Switch for Secure Shell (SSH) and Secure Copy Protocol (SCP)

The following are the prerequisites for configuring the switch for secure shell (SSH):

  • For SSH to work, the switch needs an RSA public/private key pair. This is the same with Secure Copy Protocol (SCP), which relies on SSH for its secure transport.
  • Before enabling SCP, you must correctly configure SSH, authentication, and authorization on the switch.
  • Because SCP relies on SSH for its secure transport, the router must have an Rivest, Shamir, and Adelman (RSA) key pair.
  • SCP relies on SSH for security.
  • SCP requires that authentication, authorization, and accounting (AAA) authorization be configured so the router can determine whether the user has the correct privilege level.
  • A user must have appropriate authorization to use SCP.
  • A user who has appropriate authorization can use SCP to copy any file in the Cisco IOS File System (IFS) to and from a switch by using the copy command. An authorized administrator can also do this from a workstation.
Related Concepts

Restrictions for Configuring the Switch for SSH

The following are restrictions for configuring the switch for secure shell.

  • The switch supports Rivest, Shamir, and Adelman (RSA) authentication.
  • SSH supports only the execution-shell application.
  • The SSH server and the SSH client are supported only on DES (56-bit) and 3DES (168-bit) data encryption software.
  • The switch supports the Advanced Encryption Standard (AES) encryption algorithm with a 128-bit key, 192-bit key, or 256-bit key. However, symmetric cipher AES to encrypt the keys is not supported.
  • This software release does not support IP Security (IPSec).
  • When using SCP, you cannot enter the password into the copy command. You must enter the password when prompted.
Related Concepts

Information about SSH

Secure Shell (SSH) is a protocol that provides a secure, remote connection to a device. SSH provides more security for remote connections than Telnet does by providing strong encryption when a device is authenticated. This software release supports SSH Version 1 (SSHv1) and SSH Version 2 (SSHv2).

SSH and Switch Access

For SSH configuration examples, see the “SSH Configuration Examples” section in the “Configuring Secure Shell” section in the “Other Security Features” chapter of the Cisco IOS Security Configuration Guide, Cisco IOS Release 12.4.

SSH functions the same in IPv6 as in IPv4. For IPv6, SSH supports IPv6 addresses and enables secure, encrypted connections with remote IPv6 nodes over an IPv6 transport.


Note

For complete syntax and usage information for the commands used in this section, see the command reference for this release and the “Secure Shell Commands” section of the “Other Security Features” chapter of the Cisco IOS Security Command Reference, Release 12.4 and the Cisco IOS IPv6 Command Reference.

SSH Servers, Integrated Clients, and Supported Versions

Generate Ssh Key Github

The SSH feature has an SSH server and an SSH integrated client, which are applications that run on the switch. You can use an SSH client to connect to a switch running the SSH server. The SSH server works with the SSH client supported in this release and with non-Cisco SSH clients. The SSH client also works with the SSH server supported in this release and with non-Cisco SSH servers.

The switch supports an SSHv1 or an SSHv2 server.

The switch supports an SSHv1 client.

SSH supports the Data Encryption Standard (DES) encryption algorithm, the Triple DES (3DES) encryption algorithm, and password-based user authentication.

Hitman absolution steam key generator download. Download Here: Hitman: Absolution serial key generator Hitman: Absolution serial number Hitman: Absolution cd key full game Hitman: Absolution serial code download Hitman: Absolution pc key generator Hitman: Absolution keygen. Hitman: Absolution Keygen is here and it is FREE and 100% working and legit.

SSH also supports these user authentication methods:

  • TACACS+
  • RADIUS
  • Local authentication and authorization
Related Concepts
Related Tasks

SSH Configuration Guidelines

Follow these guidelines when configuring the switch as an SSH server or SSH client:

  • An RSA key pair generated by a SSHv1 server can be used by an SSHv2 server, and the reverse.
  • If the SSH server is running on a stack master and the stack master fails, the new stack master uses the RSA key pair generated by the previous stack master.
  • If you get CLI error messages after entering the crypto key generate rsa global configuration command, an RSA key pair has not been generated. Reconfigure the hostname and domain, and then enter the crypto key generate rsa command. For more information, see Related Topics below.
  • When generating the RSA key pair, the message No host name specified might appear. If it does, you must configure a hostname by using the hostname global configuration command.
  • When generating the RSA key pair, the message No domain specified might appear. If it does, you must configure an IP domain name by using the ip domain-name global configuration command.
  • When configuring the local authentication and authorization authentication method, make sure that AAA is disabled on the console.
Related Tasks

Secure Copy Protocol Overview

The Secure Copy Protocol (SCP) feature provides a secure and authenticated method for copying switch configurations or switch image files. SCP relies on Secure Shell (SSH), an application and a protocol that provides a secure replacement for the Berkeley r-tools.

For SSH to work, the switch needs an RSA public/private key pair. This is the same with SCP, which relies on SSH for its secure transport.

Because SSH also relies on AAA authentication, and SCP relies further on AAA authorization, correct configuration is necessary.

  • Before enabling SCP, you must correctly configure SSH, authentication, and authorization on the switch.
  • Because SCP relies on SSH for its secure transport, the router must have an Rivest, Shamir, and Adelman (RSA) key pair.

Note

When using SCP, you cannot enter the password into the copy command. You must enter the password when prompted.

Secure Copy Protocol Concepts

The Secure Copy Protocol (SCP) feature provides a secure and authenticated method for copying switch configurations or switch image files. SCP relies on Secure Shell (SSH), an application and a protocol that provides a secure replacement for the Berkeley r-tools.

To configure the Secure Copy feature, you should understand the SCP concepts.

The behavior of SCP is similar to that of remote copy (rcp), which comes from the Berkeley r-tools suite, except that SCP relies on SSH for security. SCP also requires that authentication, authorization, and accounting (AAA) authorization be configured so the router can determine whether the user has the correct privilege level.

For information about how to configure and verify SCP, see the “Secure Copy Protocol” section in the Cisco IOS Security Configuration Guide: Securing User Services, Release 12.4.

Related References

How to Configure SSH

Setting Up the Switch to Run SSH

Beginning in privileged EXEC mode, follow these steps to set up your switch to run SSH:

Before You Begin

Configure user authentication for local or remote access. This step is required. For more information, see Related Topics below.

SUMMARY STEPS

    1.configureterminal

    2.hostnamehostname

    3.ip domain-namedomain_name

    4.crypto key generate rsa

    5.end


DETAILED STEPS
Command or ActionPurpose
Step 1configureterminal
Example:

Enters the global configuration mode.

Step 2hostnamehostname
Example:

Configures a hostname and IP domain name for your switch.

Note

Follow this procedure only if you are configuring the switch as an SSH server.

Step 3ip domain-namedomain_name
Example:

Configures a host domain for your switch.

Step 4crypto key generate rsa
Example:

Enables the SSH server for local and remote authentication on the switch and generates an RSA key pair. Generating an RSA key pair for the switch automatically enables SSH.

We recommend that a minimum modulus size of 1024 bits.

When you generate RSA keys, you are prompted to enter a modulus length. A longer modulus length might be more secure, but it takes longer to generate and to use.

Note

Follow this procedure only if you are configuring the switch as an SSH server.

Step 5end
Example:

Returns to privileged EXEC mode.

Generate Ssh Key Putty

Related Concepts
Related Tasks

Configuring the SSH Server

Beginning in privileged EXEC mode, follow these steps to configure the SSH server:


Note

This procedure is only required if you are configuring the switch as an SSH server.

SUMMARY STEPS

    1.configureterminal

    2.ip sshversion [12]

    3.ip ssh {timeoutsecondsauthentication-retriesnumber}

    4.Use one or both of the following:

    • transport input ssh

    5.end


DETAILED STEPS
Command or ActionPurpose
Step 1configureterminal
Example:

Enters the global configuration mode.

Step 2ip sshversion [12]
Example:

(Optional) Configures the switch to run SSH Version 1 or SSH Version 2.

  • 1—Configure the switch to run SSH Version 1.
  • 2—Configure the switch to run SSH Version 2.

If you do not enter this command or do not specify a keyword, the SSH server selects the latest SSH version supported by the SSH client. For example, if the SSH client supports SSHv1 and SSHv2, the SSH server selects SSHv2.

Step 3ip ssh {timeoutsecondsauthentication-retriesnumber}
Example:

Configures the SSH control parameters:

  • Specify the time-out value in seconds; the default is 120 seconds. The range is 0 to 120 seconds. This parameter applies to the SSH negotiation phase. After the connection is established, the switch uses the default time-out values of the CLI-based sessions. By default, up to five simultaneous, encrypted SSH connections for multiple CLI-based sessions over the network are available (session 0 to session 4). After the execution shell starts, the CLI-based session time-out value returns to the default of 10 minutes.
  • Specify the number of times that a client can re-authenticate to the server. The default is 3; the range is 0 to 5.

Repeat this step when configuring both parameters.

Step 4Use one or both of the following:
  • line vtyline_number [ending_line_number]
  • transport input ssh

Example:

or

(Optional) Configures the virtual terminal line settings.

  • Enters line configuration mode to configure the virtual terminal line settings. For line_number and ending_line_number, specify a pair of lines. The range is 0 to 15.
  • Specifies that the switch prevent non-SSH Telnet connections. This limits the router to only SSH connections.
Step 5end
Example:

Returns to privileged EXEC mode.

Monitoring the SSH Configuration and Status

This table displays the SSH server configuration and status.
Table 1 Commands for Displaying the SSH Server Configuration and Status

Command

Purpose

show ip ssh

Shows the version and configuration information for the SSH server.

show ssh

Shows the status of the SSH server.

For more information about these commands, see the “Secure Shell Commands” section in the “Other Security Features” chapter of the Cisco IOS Security Command Reference .

Additional References

Cisco Ssh Key Generation

Related Documents

Related Topic Document Title

Configuring Identity Control policies and Identity Service templates for Session Aware networking.

Session Aware Networking Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3850 Switches)

Configuring RADIUS, TACACS+, Secure Shell, 802.1X and AAA.

Securing User Services Configuration Guide Library, Cisco IOS XE Release 3SE (Catalyst 3850 Switches)

Error Message Decoder

DescriptionLink

To help you research and resolve system error messages in this release, use the Error Message Decoder tool.

MIBs

MIB MIBs Link

All supported MIBs for this release.

To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL:

Technical Assistance

Description Link

The Cisco Support website provides extensive online resources, including documentation and tools for troubleshooting and resolving technical issues with Cisco products and technologies.

To receive security and technical information about your products, you can subscribe to various services, such as the Product Alert Tool (accessed from Field Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds.

Access to most tools on the Cisco Support website requires a Cisco.com user ID and password.